grsecurity-2.1.14-2.6.32.8 debian lenny

[artex]

Hi all,

I just patched the last stable kernel 2.6.32.8 with grsecurity-2.1.14-2.6.32.8, I restarted without errors but no wireless connection, I tried to search for my card but nothing... I installed madwifi tools madwifi-sources but no changes. Do you have any idea?

[specs]

There is no reason why wifi should be blocked.
Is your wifi enabled in the BIOS?
Does dmesg show any clue?
Or "iwlist wlan0 scanning"?
What driver do you use (and and how do "lspci" and "lspci -n" recognize your wifi card)?

PS I don't use madwifi tools with Debian 5.0. I do use "wireless-tools", "iw" and "wpasupplicant" (haven't upgraded that pc yet from 2.6.32.8-201002090925 to 2.6.36.8-201002200811 but I don't expect problems).

[artex]

Hi Specs and ty for yor help.

I patched the kernel with gr,compiled with success and when I tried to use the new kernel-grsecurity my wifi card was not detected....
here is the detail under the non-patched kernel

lspci -n
00:00.0 0600: 1002:5950 (rev 10)
00:01.0 0604: 1002:5a3f
00:04.0 0604: 1002:5a36
00:05.0 0604: 1002:5a37
00:12.0 0101: 1002:4379 (rev 80)
00:13.0 0c03: 1002:4374 (rev 80)
00:13.1 0c03: 1002:4375 (rev 80)
00:13.2 0c03: 1002:4373 (rev 80)
00:14.0 0c05: 1002:4372 (rev 83)
00:14.1 0101: 1002:4376 (rev 80)
00:14.2 0403: 1002:437b (rev 01)
00:14.3 0601: 1002:4377 (rev 80)
00:14.4 0604: 1002:4371 (rev 80)
00:18.0 0600: 1022:1100
00:18.1 0600: 1022:1101
00:18.2 0600: 1022:1102
00:18.3 0600: 1022:1103
01:05.0 0300: 1002:5975
06:01.0 0200: 10ec:8139 (rev 10)
06:02.0 0200: 168c:001a (rev 01)
06:04.0 0607: 1524:1412 (rev 10)
06:04.1 0501: 1524:0530 (rev 01)
06:04.2 0805: 1524:0550 (rev 01)
06:04.3 0501: 1524:0520 (rev 01)
06:04.4 0501: 1524:0551 (rev 01)

wlan0 scan
wlan0 Scan completed :
Cell 01 - Address: xx:xx:xx:xx:xx:xx
ESSID:"xxxxxxx"
Mode:Master
Channel:1
Frequency:2.412 GHz (Channel 1)
Quality=28/100 Signal level=-75 dBm Noise level=-93 dBm
Encryption key:on
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s
6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s
36 Mb/s; 48 Mb/s; 54 Mb/s
Extra:tsf=000000102ea888e6
I deleted the other wifi clients, not mine



dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-2-686 (Debian 2.6.26-21lenny3) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Wed Feb 10 08:59:21 UTC 2010
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000002fe90000 (usable)
[ 0.000000] BIOS-e820: 000000002fe90000 - 000000002fe9a000 (ACPI data)
[ 0.000000] BIOS-e820: 000000002fe9a000 - 000000002ff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000002ff00000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 766MB LOWMEM available.
[ 0.000000] found SMP MP-table at [c00f8110] 000f8110
[ 0.000000] Entering add_active_range(0, 0, 196240) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 196240
[ 0.000000] HighMem 196240 -> 196240
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 196240
[ 0.000000] On node 0 totalpages: 196240
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1502 pages used for memmap
[ 0.000000] Normal zone: 190642 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000F8040, 0014 (r0 ACRSYS)
[ 0.000000] ACPI: RSDT 2FE9198B, 0038 (r1 ACRSYS ACRPRDCT 6040000 LTP 0)
[ 0.000000] ACPI: FACP 2FE99CA0, 0074 (r1 ATI Bowfin 6040000 ATI F4240)
[ 0.000000] ACPI: DSDT 2FE919C3, 82DD (r1 Acer Navarro 6040000 MSFT 3000000)
[ 0.000000] ACPI: FACS 2FE9AFC0, 0040
[ 0.000000] ACPI: SLIC 2FE99D14, 0176 (r1 ACRSYS ACRPRDCT 6040000 LOHR 0)
[ 0.000000] ACPI: APIC 2FE99E8A, 0046 (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: MCFG 2FE99ED0, 003C (r1 PTLTD MCFG 6040000 LTP 0)
[ 0.000000] ACPI: SSDT 2FE99F0C, 00F4 (r1 PTLTD POWERNOW 6040000 LTP 1)
[ 0.000000] ATI board detected. Disabling timer routing over 8254.
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
[ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 0000000000100000
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37992 bytes of per cpu data
[ 0.000000] NR_CPUS: 8, nr_cpu_ids: 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 194706
[ 0.000000] Kernel command line: root=/dev/sda1 ro splash vga=769
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1795.526 MHz processor.
[ 0.004000] Console: colour dummy device 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Memory: 764604k/784960k available (1771k kernel code, 19784k reserved, 750k data, 244k init, 0k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.004000] vmalloc : 0xf0800000 - 0xff7fe000 ( 239 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xefe90000 ( 766 MB)
[ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB)
[ 0.004000] .data : 0xc02bacb5 - 0xc0376620 ( 750 kB)
[ 0.004000] .text : 0xc0100000 - 0xc02bacb5 (1771 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.084089] Calibrating delay using timer specific routine.. 3595.19 BogoMIPS (lpj=7190380)
[ 0.084129] Security Framework initialized
[ 0.084137] SELinux: Disabled at boot.
[ 0.084142] Capability LSM initialized
[ 0.084159] Mount-cache hash table entries: 512
[ 0.084278] Initializing cgroup subsys ns
[ 0.084284] Initializing cgroup subsys cpuacct
[ 0.084290] Initializing cgroup subsys devices
[ 0.084308] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.084315] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.084321] Intel machine check architecture supported.
[ 0.084327] Intel machine check reporting enabled on CPU#0.
[ 0.084340] Checking 'hlt' instruction... OK.
[ 0.100290] SMP alternatives: switching to UP code
[ 0.106826] Freeing SMP alternatives: 16k freed
[ 0.106834] ACPI: Core revision 20080321
[ 0.124189] ENABLING IO-APIC IRQs
[ 0.124377] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.164010] CPU0: AMD Mobile AMD Sempron(tm) Processor 3500+ stepping 02
[ 0.164010] Brought up 1 CPUs
[ 0.164010] Total of 1 processors activated (3595.19 BogoMIPS).
[ 0.164010] CPU0 attaching sched-domain:
[ 0.164010] domain 0: span 0
[ 0.164010] groups: 0
[ 0.164010] net_namespace: 660 bytes
[ 0.164010] Booting paravirtualized kernel on bare hardware
[ 0.164010] NET: Registered protocol family 16
[ 0.164010] ACPI: bus type pci registered
[ 0.164010] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 7
[ 0.164010] PCI: MCFG area at e0000000 reserved in E820
[ 0.164010] PCI: Using MMCONFIG for extended config space
[ 0.164010] PCI: Using configuration type 1 for base access
[ 0.164010] Setting up standard PCI resources
[ 0.164010] ACPI: EC: Look up EC in DSDT
[ 0.166347] ACPI Error (dsobject-0501): Package List length (1) larger than NumElements count (0), truncated
[ 0.166359] [20080321]
[ 0.168010] ACPI: BIOS _OSI(Linux) query ignored
[ 0.168010] ACPI: DMI System Vendor:
[ 0.168010] ACPI: DMI Product Name:
[ 0.168010] ACPI: DMI Product Version: V3.09A
[ 0.168010] ACPI: DMI Board Name: Navarro
[ 0.168010] ACPI: DMI BIOS Vendor: Acer
[ 0.168010] ACPI: DMI BIOS Date: 08/24/2007
[ 0.168010] ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
[ 0.168010] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
[ 0.185376] ACPI: Interpreter enabled
[ 0.185381] ACPI: (supports S0 S3 S4 S5)
[ 0.185397] ACPI: Using IOAPIC for interrupt routing
[ 0.189333] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.293445] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
[ 0.293452] ACPI: EC: driver started in interrupt mode
[ 0.293495] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.295236] PCI: Transparent bridge - 0000:00:14.4
[ 0.295294] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.295482] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
[ 0.295622] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
[ 0.295763] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BB4_._PRT]
[ 0.295903] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BB5_._PRT]
[ 0.296060] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.296219] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.301517] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[ 0.301672] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[ 0.301823] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[ 0.301975] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[ 0.302126] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[ 0.302277] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[ 0.302428] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[ 0.302579] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[ 0.302731] ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7) *0, disabled.
[ 0.302916] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.302947] pnp: PnP ACPI init
[ 0.302957] ACPI: bus type pnp registered
[ 0.305723] pnp 00:09: mem resource (0xe0000-0xfffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
[ 0.305734] pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
[ 0.305744] pnp 00:09: mem resource (0xe0000-0xfffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
[ 0.305754] pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
[ 0.305765] pnp 00:09: mem resource (0xe0000-0xfffff) overlaps 0000:00:05.0 BAR 8 (0x0-0xfffff), disabling
[ 0.305775] pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:00:05.0 BAR 8 (0x0-0xfffff), disabling
[ 0.305786] pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:00:12.0 BAR 6 (0x0-0x7ffff), disabling
[ 0.305808] pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:01:05.0 BAR 6 (0x0-0x1ffff), disabling
[ 0.340274] pnp: PnP ACPI: found 10 devices
[ 0.340280] ACPI: ACPI bus type pnp unregistered
[ 0.340286] PnPBIOS: Disabled by ACPI PNP
[ 0.340503] PCI: Using ACPI for IRQ routing
[ 0.340512] PCI: Cannot allocate resource region 7 of bridge 0000:00:04.0
[ 0.340519] PCI: Cannot allocate resource region 8 of bridge 0000:00:04.0
[ 0.340525] PCI: Cannot allocate resource region 9 of bridge 0000:00:04.0
[ 0.340531] PCI: Cannot allocate resource region 7 of bridge 0000:00:05.0
[ 0.340538] PCI: Cannot allocate resource region 8 of bridge 0000:00:05.0
[ 0.340742] ACPI: RTC can wake from S4
[ 0.340769] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[ 0.340777] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.340786] system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.340801] system 00:08: ioport range 0x1080-0x1080 has been reserved
[ 0.340808] system 00:08: ioport range 0x40b-0x40b has been reserved
[ 0.340815] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.340822] system 00:08: ioport range 0x4d6-0x4d6 has been reserved
[ 0.340828] system 00:08: ioport range 0xc00-0xc01 has been reserved
[ 0.340835] system 00:08: ioport range 0xc14-0xc14 has been reserved
[ 0.340842] system 00:08: ioport range 0xc50-0xc52 has been reserved
[ 0.340849] system 00:08: ioport range 0xc6c-0xc6c has been reserved
[ 0.340855] system 00:08: ioport range 0xc6f-0xc6f has been reserved
[ 0.340862] system 00:08: ioport range 0xcd4-0xcd5 has been reserved
[ 0.340869] system 00:08: ioport range 0xcd6-0xcd7 has been reserved
[ 0.340876] system 00:08: ioport range 0xcd8-0xcdf has been reserved
[ 0.340883] system 00:08: ioport range 0x8000-0x805f has been reserved
[ 0.340890] system 00:08: ioport range 0xf40-0xf47 has been reserved
[ 0.340896] system 00:08: ioport range 0x280-0x293 has been reserved
[ 0.340903] system 00:08: ioport range 0x87f-0x87f has been reserved
[ 0.340915] system 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
[ 0.371283] PCI: region 0000:06:04.0/9 too large: 0x0000000000000000-0x0000000003ffffff
[ 0.371300] PCI: Bridge: 0000:00:01.0
[ 0.371305] IO window: 9000-9fff
[ 0.371311] MEM window: 0xb0100000-0xb01fffff
[ 0.371317] PREFETCH window: 0x00000000c0000000-0x00000000cfffffff
[ 0.371324] PCI: Bridge: 0000:00:04.0
[ 0.371328] IO window: disabled.
[ 0.371333] MEM window: disabled.
[ 0.371338] PREFETCH window: disabled.
[ 0.371344] PCI: Bridge: 0000:00:05.0
[ 0.371348] IO window: disabled.
[ 0.371353] MEM window: disabled.
[ 0.371358] PREFETCH window: disabled.
[ 0.371371] PCI: Bus 7, cardbus bridge: 0000:06:04.0
[ 0.371376] IO window: 0x0000a400-0x0000a4ff
[ 0.371385] IO window: 0x0000a800-0x0000a8ff
[ 0.371394] MEM window: 0x54000000-0x57ffffff
[ 0.371403] PCI: Bridge: 0000:00:14.4
[ 0.371409] IO window: a000-afff
[ 0.371418] MEM window: 0xb0200000-0xb02fffff
[ 0.371425] PREFETCH window: disabled.
[ 0.371449] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 0.371457] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 0.371485] ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 0.371517] NET: Registered protocol family 2
[ 0.371607] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.371907] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.372590] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.372922] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.372929] TCP reno registered
[ 0.373027] NET: Registered protocol family 1
[ 0.373140] checking if image is initramfs... it is
[ 0.872053] Switched to high resolution mode on CPU 0
[ 1.121727] Freeing initrd memory: 9536k freed
[ 1.122320] audit: initializing netlink socket (disabled)
[ 1.122337] type=2000 audit(1266931324.120:1): initialized
[ 1.122444] Total HugeTLB memory allocated, 0
[ 1.122519] VFS: Disk quotas dquot_6.5.1
[ 1.122554] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.122592] msgmni has been set to 1512
[ 1.122693] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.122702] io scheduler noop registered
[ 1.122707] io scheduler anticipatory registered
[ 1.122712] io scheduler deadline registered
[ 1.122727] io scheduler cfq registered (default)
[ 1.122737] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[ 1.122797] pci 0000:01:05.0: Boot video device
[ 1.122906] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 1.122928] assign_interrupt_mode Found MSI capability
[ 1.122935] Allocate Port Service[0000:00:04.0:pcie00]
[ 1.122970] Allocate Port Service[0000:00:04.0:pcie02]
[ 1.123029] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 1.123050] assign_interrupt_mode Found MSI capability
[ 1.123056] Allocate Port Service[0000:00:05.0:pcie00]
[ 1.123092] Allocate Port Service[0000:00:05.0:pcie02]
[ 1.123327] vesafb: framebuffer at 0xc0000000, mapped to 0xf0880000, using 600k, total 16384k
[ 1.123337] vesafb: mode is 640x480x8, linelength=640, pages=50
[ 1.123342] vesafb: protected mode interface info at c000:53f8
[ 1.123348] vesafb: pmi: set display start = c00c5466, set palette = c00c54a0
[ 1.123353] vesafb: pmi: ports = 9010 9016 9054 9038 903c 905c 9000 9004 90b0 90b2 90b4
[ 1.123366] vesafb: scrolling: redraw
[ 1.123372] vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
[ 1.134480] Console: switching to colour frame buffer device 80x30
[ 1.145749] fb0: VESA VGA frame buffer device
[ 1.146033] isapnp: Scanning for PnP cards...
[ 1.457428] isapnp: No Plug & Play device found
[ 1.459782] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.470954] brd: module loaded
[ 1.476086] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[ 1.491351] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.498505] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.504125] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.511214] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.518123] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.524611] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.531414] mice: PS/2 mouse device common for all mice
[ 1.538104] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.544376] rtc0: alarms up to one month
[ 1.551252] cpuidle: using governor ladder
[ 1.557826] cpuidle: using governor menu
[ 1.564378] No iBFT detected.
[ 1.571443] TCP cubic registered
[ 1.577295] NET: Registered protocol family 17
[ 1.583955] Using IPI No-Shortcut mode
[ 1.590147] registered taskstats version 1
[ 1.596230] rtc_cmos 00:04: setting system clock to 2010-02-23 13:22:05 UTC (1266931325)
[ 1.608370] Freeing unused kernel memory: 244k freed
[ 1.620582] input: AT Translated Set 2 keyboard as /class/input/input0
[ 1.787325] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 1.801660] ACPI: ACPI0007:00 is registered as cooling_device0
[ 1.810624] Marking TSC unstable due to: TSC halts in idle.
[ 1.878335] ACPI: LNXTHERM:01 is registered as thermal_zone0
[ 1.910940] ACPI: Thermal Zone [THRM] (23 C)
[ 2.577975] Uniform Multi-Platform E-IDE driver
[ 2.584281] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 2.636009] usbcore: registered new interface driver usbfs
[ 2.642544] usbcore: registered new interface driver hub
[ 2.698018] No dock devices found.
[ 2.710504] usbcore: registered new device driver usb
[ 2.717423] ATIIXP: IDE controller (0x1002:0x4376 rev 0x80) at PCI slot 0000:00:14.1
[ 2.731169] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 2.746685] ATIIXP: not 100% native mode: will probe irqs later
[ 2.754127] ide0: BM-DMA at 0x8420-0x8427
[ 2.759709] ATIIXP: simplex device: DMA disabled
[ 2.767705] ide1: DMA disabled
[ 2.775246] Probing IDE interface ide0...
[ 2.837781] SCSI subsystem initialized
[ 2.847656] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.920301] libata version 3.00 loaded.
[ 2.926392] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 2.990680] sdhci: Secure Digital Host Controller Interface driver
[ 2.998368] sdhci: Copyright(c) Pierre Ossman
[ 3.732483] hda: HL-DT-ST DVDRAM GSA-T10N, ATAPI CD/DVD-ROM drive
[ 4.076099] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 4.076933] hda: UDMA/33 mode selected
[ 4.087061] Probing IDE interface ide1...
[ 4.648099] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 4.661777] ide1 at 0x170-0x177,0x376 on irq 15
[ 4.671701] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 4.692078] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 4.699769] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[ 4.719638] ohci_hcd 0000:00:13.0: irq 19, io mem 0xb0005000
[ 4.783632] usb usb1: configuration #1 chosen from 1 choice
[ 4.792076] hub 1-0:1.0: USB hub found
[ 4.801331] hub 1-0:1.0: 4 ports detected
[ 4.911556] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.920043] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.937375] usb usb1: Product: OHCI Host Controller
[ 4.947915] usb usb1: Manufacturer: Linux 2.6.26-2-686 ohci_hcd
[ 4.957293] usb usb1: SerialNumber: 0000:00:13.0
[ 4.968012] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19
[ 4.984042] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 4.995891] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[ 5.013013] ohci_hcd 0000:00:13.1: irq 19, io mem 0xb0006000
[ 5.078521] usb usb2: configuration #1 chosen from 1 choice
[ 5.087990] hub 2-0:1.0: USB hub found
[ 5.097284] hub 2-0:1.0: 4 ports detected
[ 5.210797] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.220045] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.237486] usb usb2: Product: OHCI Host Controller
[ 5.247702] usb usb2: Manufacturer: Linux 2.6.26-2-686 ohci_hcd
[ 5.257005] usb usb2: SerialNumber: 0000:00:13.1
[ 5.268010] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19
[ 5.284031] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 5.295856] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 5.313398] ehci_hcd 0000:00:13.2: irq 19, io mem 0xb0007000
[ 5.377771] usb 1-1: new full speed USB device using ohci_hcd and address 2
[ 5.397548] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 5.416129] usb usb3: configuration #1 chosen from 1 choice
[ 5.427559] hub 3-0:1.0: USB hub found
[ 5.437232] hub 3-0:1.0: 8 ports detected
[ 5.502347] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 5.550314] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.560042] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.579083] usb usb3: Product: EHCI Host Controller
[ 5.588643] usb usb3: Manufacturer: Linux 2.6.26-2-686 ehci_hcd
[ 5.598593] usb usb3: SerialNumber: 0000:00:13.2
[ 5.610286] 8139cp 0000:06:01.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 5.628023] 8139cp 0000:06:01.0: Try the "8139too" driver instead.
[ 5.639522] sdhci: SDHCI controller found at 0000:06:04.2 [1524:0550] (rev 1)
[ 5.649257] ACPI: PCI Interrupt 0000:06:04.2[B] -> GSI 23 (level, low) -> IRQ 23
[ 5.669276] mmc0: SDHCI at 0xb0210800 irq 23 PIO
[ 5.679372] sdhci: SDHCI controller found at 0000:06:04.4 [1524:0551] (rev 1)
[ 5.689426] sdhci 0000:06:04.4: enabling device (0000 -> 0002)
[ 5.699685] ACPI: PCI Interrupt 0000:06:04.4[B] -> GSI 23 (level, low) -> IRQ 23
[ 5.720257] mmc1: SDHCI at 0xb0210100 irq 23 PIO
[ 5.732695] sata_sil 0000:00:12.0: version 2.3
[ 5.732695] sata_sil 0000:00:12.0: enabling device (0005 -> 0007)
[ 5.743022] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 5.772022] scsi0 : sata_sil
[ 5.785971] 8139too Fast Ethernet driver 0.9.28
[ 5.807389] scsi1 : sata_sil
[ 5.816385] ata1: SATA max UDMA/100 mmio m512@0xb0004000 tf 0xb0004080 irq 22
[ 5.826387] ata2: SATA max UDMA/100 mmio m512@0xb0004000 tf 0xb00040c0 irq 22
[ 5.866949] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
[ 5.876819] Uniform CD-ROM driver Revision: 3.20
[ 5.996054] usb 3-1: new high speed USB device using ehci_hcd and address 2
[ 6.138054] usb 3-1: configuration #1 chosen from 1 choice
[ 6.152012] usb 3-1: New USB device found, idVendor=0718, idProduct=043b
[ 6.159790] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.166328] usb 3-1: Product: Nano Pro
[ 6.174030] usb 3-1: Manufacturer: Imation
[ 6.181617] usb 3-1: SerialNumber: 078A1715026E
[ 6.210621] Initializing USB Mass Storage driver...
[ 6.219317] scsi2 : SCSI emulation for USB Mass Storage devices
[ 6.226922] usbcore: registered new interface driver usb-storage
[ 6.234281] USB Mass Storage support registered.
[ 6.242579] usb-storage: device found at 2
[ 6.242583] usb-storage: waiting for device to settle before scanning
[ 6.356076] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 6.372037] ata1.00: ATA-7: Hitachi HTS541680J9SA00, SB2OC70P, max UDMA/100
[ 6.380009] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 6.399936] ata1.00: configured for UDMA/100
[ 6.722725] ata2: SATA link down (SStatus 0 SControl 310)
[ 6.728140] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54168 SB2O PQ: 0 ANSI: 5
[ 6.743595] ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 6.759108] eth0: RealTek RTL8139 at 0xa000, 00:1b:38:29:9f:04, IRQ 21
[ 6.766429] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 6.786963] Driver 'sd' needs updating - please use bus_type methods
[ 6.795556] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 6.804060] sd 0:0:0:0: [sda] Write Protect is off
[ 6.811511] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.812560] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.827787] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 6.835702] sd 0:0:0:0: [sda] Write Protect is off
[ 6.843428] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.843456] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.858650] sda: sda1 sda2 < sda5 > sda3
[ 7.279082] sd 0:0:0:0: [sda] Attached SCSI disk
[ 7.692460] device-mapper: uevent: version 1.0.3
[ 7.712010] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 7.859395] PM: Starting manual resume from disk
[ 9.058917] kjournald starting. Commit interval 5 seconds
[ 9.058917] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.240227] usb-storage: device scan complete
[ 11.240825] scsi 2:0:0:0: Direct-Access Imation Nano Pro PMAP PQ: 0 ANSI: 0 CCS
[ 11.242560] sd 2:0:0:0: [sdb] 15859712 512-byte hardware sectors (8120 MB)
[ 11.243193] sd 2:0:0:0: [sdb] Write Protect is off
[ 11.243197] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 11.243199] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 11.246687] sd 2:0:0:0: [sdb] 15859712 512-byte hardware sectors (8120 MB)
[ 11.247322] sd 2:0:0:0: [sdb] Write Protect is off
[ 11.247325] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 11.247327] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 11.247331] sdb: sdb1
[ 11.248269] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 12.180088] udevd version 125 started
[ 12.936778] ACPI: WMI: Mapper loaded
[ 13.023490] acer-wmi: Acer Laptop ACPI-WMI Extras version 0.1
[ 13.429541] Linux agpgart interface v0.103
[ 13.443044] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 13.444807] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 13.703702] input: Power Button (FF) as /class/input/input1
[ 13.731341] ACPI: Power Button (FF) [PWRF]
[ 13.731413] input: Lid Switch as /class/input/input2
[ 13.744166] ACPI: Lid Switch [LID]
[ 13.744236] input: Power Button (CM) as /class/input/input3
[ 13.777548] ACPI: Power Button (CM) [PWRB]
[ 13.777621] input: Sleep Button (CM) as /class/input/input4
[ 13.804067] ACPI: Sleep Button (CM) [SLPB]
[ 14.154426] ACPI: AC Adapter [ACAD] (off-line)
[ 14.629513] ACPI: Battery Slot [BAT1] (battery present)
[ 14.632924] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[ 14.643742] ACPI: device:27 is registered as cooling_device1
[ 14.643951] input: Video Bus as /class/input/input5
[ 14.664069] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 14.664091] proc_dir_entry 'VGA' already registered
[ 14.664095] Pid: 1598, comm: modprobe Not tainted 2.6.26-2-686 #1
[ 14.664107] [<c01a48f1>] proc_register+0xb4/0x11f
[ 14.664120] [<c01a4ad4>] proc_mkdir_mode+0x2b/0x3d
[ 14.664126] [<f0a48ff3>] acpi_video_bus_add+0x177/0xaef [video]
[ 14.664134] [<c01ad8cc>] sysfs_find_dirent+0x13/0x23
[ 14.664145] [<c01ae468>] sysfs_create_link+0x99/0xdd
[ 14.664156] [<c0216e06>] acpi_device_probe+0x33/0x7c
[ 14.664164] [<c023b161>] __driver_attach+0x0/0x55
[ 14.664168] [<c023b0ea>] driver_probe_device+0xb5/0x12c
[ 14.664174] [<c023b198>] __driver_attach+0x37/0x55
[ 14.664180] [<c023aa33>] bus_for_each_dev+0x37/0x59
[ 14.664192] [<c023af85>] driver_attach+0x11/0x13
[ 14.664196] [<c023b161>] __driver_attach+0x0/0x55
[ 14.664199] [<c023ad87>] bus_add_driver+0x8a/0x1a7
[ 14.664205] [<c01de24c>] kset_find_obj+0x20/0x4b
[ 14.664213] [<c023b379>] driver_register+0x6d/0xc1
[ 14.664221] [<f09f602f>] acpi_video_init+0x2f/0x4d [video]
[ 14.664227] [<c013f740>] sys_init_module+0x187a/0x19ea
[ 14.664234] [<c018a975>] seq_open+0x4d/0x6a
[ 14.664242] [<c0115b8f>] do_page_fault+0x2a3/0x5c0
[ 14.664269] [<c016662c>] vma_link+0xa3/0xbd
[ 14.664280] [<c02170ef>] acpi_bus_register_driver+0x0/0x38
[ 14.664315] [<c0103857>] sysenter_past_esp+0x78/0xb1
[ 14.664337] =======================
[ 14.674913] ACPI: device:2c is registered as cooling_device2
[ 14.675112] input: Video Bus as /class/input/input6
[ 14.700081] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 15.540835] input: PC Speaker as /class/input/input7
[ 15.777440] Yenta: CardBus bridge found at 0000:06:04.0 [1025:009f]
[ 15.777472] PCI: Bus 7, cardbus bridge: 0000:06:04.0
[ 15.777474] IO window: 0x0000a400-0x0000a4ff
[ 15.777480] IO window: 0x0000a800-0x0000a8ff
[ 15.777486] PREFETCH window: 0x50400000-0x507fffff
[ 15.777492] MEM window: 0x54000000-0x57ffffff
[ 15.777503] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 15.777505] Yenta: Routing CardBus interrupts to PCI
[ 15.777512] Yenta TI: socket 0000:06:04.0, mfunc 0x90501212, devctl 0x44
[ 15.912116] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000
[ 15.944764] input: SynPS/2 Synaptics TouchPad as /class/input/input8
[ 16.008787] Yenta: ISA IRQ mask 0x0cf8, PCI irq 20
[ 16.008794] Socket status: 30000006
[ 16.008797] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
[ 16.008801] cs: IO port probe 0xa000-0xafff: clean.
[ 16.009149] pcmcia: parent PCI bridge Memory window: 0xb0200000 - 0xb02fffff
[ 16.009557] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
[ 16.009684] ACPI: PCI Interrupt 0000:06:02.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 16.009717] ath5k_pci 0000:06:02.0: registered as 'phy0'
[ 16.287526] phy0: Selected rate control algorithm 'pid'
[ 16.415371] ath5k phy0: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45)
[ 17.256227] cs: IO port probe 0x100-0x3af: clean.
[ 17.256227] cs: IO port probe 0x3e0-0x4ff: clean.
[ 17.256227] cs: IO port probe 0x820-0x8ff: clean.
[ 17.260696] cs: IO port probe 0xc00-0xcf7: clean.
[ 17.261490] cs: IO port probe 0xa00-0xaff: clean.
[ 17.817883] Adding 96348k swap on /dev/sda5. Priority:-1 extents:1 across:96348k
[ 17.972211] EXT3 FS on sda1, internal journal
[ 18.521679] loop: module loaded
[ 19.321012] fuse init (API version 7.9)
[ 22.098852] ath5k phy0: noise floor calibration failed (2442MHz)
[ 22.098858] ath5k phy0: ath5k_chan_set: unable to reset channel (2442 Mhz)
[ 22.098861] wlan0: failed to set freq to 2442 MHz for scan
[ 22.145637] ath5k phy0: noise floor calibration failed (2447MHz)
[ 22.145640] ath5k phy0: ath5k_chan_set: unable to reset channel (2447 Mhz)
[ 22.145643] wlan0: failed to set freq to 2447 MHz for scan
[ 22.192447] ath5k phy0: noise floor calibration failed (2452MHz)
[ 22.192450] ath5k phy0: ath5k_chan_set: unable to reset channel (2452 Mhz)
[ 22.192452] wlan0: failed to set freq to 2452 MHz for scan
[ 22.632690] wlan0: Initial auth_alg=0
[ 22.632696] wlan0: authenticate with AP 00:23:08:36:d9:f7
[ 22.635294] wlan0: RX authentication from 00:23:08:36:d9:f7 (alg=0 transaction=2 status=0)
[ 22.635298] wlan0: authenticated
[ 22.635301] wlan0: associate with AP 00:23:08:36:d9:f7
[ 22.646114] wlan0: RX AssocResp from 00:23:08:36:d9:f7 (capab=0x471 status=0 aid=1)
[ 22.646114] wlan0: associated
[ 22.646114] wlan0: switched to short barker preamble (BSSID=00:23:08:36:d9:f7)
[ 33.102238] NET: Registered protocol family 10
[ 33.102791] lo: Disabled Privacy Extensions
[ 43.816033] wlan0: no IPv6 routers present
[ 83.458430] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 83.458435] vboxdrv: Successfully done.
[ 83.458437] vboxdrv: Found 1 processor cores.
[ 83.458505] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 83.458509] vboxdrv: Successfully loaded version 3.1.4 (interface 0x00100001).
[ 87.814827] ath5k phy0: noise floor calibration failed (2442MHz)
[ 87.814833] ath5k phy0: ath5k_chan_set: unable to reset channel (2442 Mhz)
[ 87.814836] wlan0: failed to set freq to 2442 MHz for scan
[ 99.354673] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 131.893263] hda-intel: Invalid position buffer, using LPIB read method instead.
[ 4391.030682] atkbd.c: Unknown key pressed (translated set 2, code 0xb4 on isa0060/serio0).
[ 4391.030682] atkbd.c: Use 'setkeycodes e034 <keycode>' to make it known.
[ 4391.089623] atkbd.c: Unknown key released (translated set 2, code 0xb4 on isa0060/serio0).
[ 4391.089623] atkbd.c: Use 'setkeycodes e034 <keycode>' to make it known.
[ 5601.113704] ath5k phy0: noise floor calibration timeout (2457MHz)
[ 5601.113709] ath5k phy0: ath5k_chan_set: unable to reset channel (2457 Mhz)
[ 5601.113712] wlan0: failed to set freq to 2457 MHz for scan

I repeat, this is under non-patched kernel and everything is fine
I will test under patched-kernel and wil post the result here


Thank you again for your support