NoNetworkConnectivity and PAM Unable to dispatch function, a
Posted: Thu Aug 09, 2012 8:20 amNoNetworkConnectivity and PAM Unable to dispatch function, and empty syslog.
Regular debian kernel gets to network. Older grsec too.
After upgrading to the newest test patch and 3.5 kernel I have no syslog and can't get to the network. I can register to the network but can't send any packets, no ping no nothing.
Please help!
http://ompldr.org/vZjFraw
here is dmesg
Regular debian kernel gets to network. Older grsec too.
After upgrading to the newest test patch and 3.5 kernel I have no syslog and can't get to the network. I can register to the network but can't send any packets, no ping no nothing.
Please help!
http://ompldr.org/vZjFraw
here is dmesg
- Code: Select all
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.5.0-grsec (root@debian) (gcc version 4.6.3 (Debian 4.6.3-8) ) #9 SMP Wed Aug 8 15:53:20 EDT 2012
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.5.0-grsec root=/dev/mapper/debian-root ro quiet vga=792
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ace3efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ace3f000-0x00000000acebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000acebf000-0x00000000acfbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000acfbf000-0x00000000acffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000acfff000-0x00000000acffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ad000000-0x00000000af9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI: Hewlett-Packard HP Pavilion g7 Notebook PC /1671, BIOS F.33 08/30/2011
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x14fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0AD000000 mask FFF000000 uncachable
[ 0.000000] 3 base 0AE000000 mask FFE000000 uncachable
[ 0.000000] 4 base 0B0000000 mask FF0000000 uncachable
[ 0.000000] 5 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 6 base 100000000 mask FC0000000 write-back
[ 0.000000] 7 base 140000000 mask FF0000000 write-back
[ 0.000000] 8 base 14FE00000 mask FFFE00000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xad000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 28672
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xacffffff]
[ 0.000000] [mem 0x00000000-0xacffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0xacffffff @ [mem 0x1fa94000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x14fdfffff]
[ 0.000000] [mem 0x100000000-0x14fdfffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x14fdfffff @ [mem 0xace38000-0xace3efff]
[ 0.000000] RAMDISK: [mem 0x2887e000-0x30436fff]
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 00000000acffe120 00084 (v01 HPQOEM SLIC-MPC 00000001 01000013)
[ 0.000000] ACPI: FACP 00000000acffc000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: DSDT 00000000acfed000 0BD0A (v01 HP 1671 00000000 MSFT 01000013)
[ 0.000000] ACPI: FACS 00000000acf6c000 00040
[ 0.000000] ACPI: ASF! 00000000acffd000 000A5 (v32 HP 1671 00000001 MSFT 01000013)
[ 0.000000] ACPI: HPET 00000000acffb000 00038 (v01 HP 1671 00000001 MSFT 01000013)
[ 0.000000] ACPI: APIC 00000000acffa000 0008C (v02 HP 1671 00000001 MSFT 01000013)
[ 0.000000] ACPI: MCFG 00000000acff9000 0003C (v01 HP 1671 00000001 MSFT 01000013)
[ 0.000000] ACPI: SLIC 00000000acfec000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: MSDM 00000000acfeb000 00055 (v03 HP 1671 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 00000000acfea000 00D52 (v01 HP 1671 00001000 MSFT 01000013)
[ 0.000000] ACPI: BOOT 00000000acfe8000 00028 (v01 HP 1671 00000001 MSFT 01000013)
[ 0.000000] ACPI: ASPT 00000000acfe5000 00034 (v07 HP 1671 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 00000000acfe4000 0090C (v01 HP 1671 00003000 INTL 20100121)
[ 0.000000] ACPI: SSDT 00000000acfe3000 00996 (v01 HP 1671 00003000 INTL 20100121)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000014fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x14fdfffff]
[ 0.000000] NODE_DATA [mem 0x14fdfc000-0x14fdfffff]
[ 0.000000] [ffffea0000000000-ffffea00049fffff] PMD -> [ffff88014b400000-ffff88014edfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x14fdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xace3efff]
[ 0.000000] node 0: [mem 0xacfff000-0xacffffff]
[ 0.000000] node 0: [mem 0x100000000-0x14fdfffff]
[ 0.000000] On node 0 totalpages: 1035213
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 7 pages reserved
[ 0.000000] DMA zone: 3918 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 689784 pages, LIFO batch:31
[ 0.000000] Normal zone: 4473 pages used for memmap
[ 0.000000] Normal zone: 322695 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000ace3f000 - 00000000acebf000
[ 0.000000] PM: Registered nosave memory: 00000000acebf000 - 00000000acfbf000
[ 0.000000] PM: Registered nosave memory: 00000000acfbf000 - 00000000acfff000
[ 0.000000] PM: Registered nosave memory: 00000000ad000000 - 00000000afa00000
[ 0.000000] PM: Registered nosave memory: 00000000afa00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
[ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000
[ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
[ 0.000000] e820: [mem 0xafa00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 24 pages/cpu @ffff88014fa00000 s69312 r8192 d20800 u262144
[ 0.000000] pcpu-alloc: s69312 r8192 d20800 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1016397
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.5.0-grsec root=/dev/mapper/debian-root ro quiet vga=792
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3873456k/5502976k available (3807k kernel code, 1362124k absent, 267396k reserved, 8496k data, 672k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 2194.920 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.84 BogoMIPS (lpj=8779680)
[ 0.000006] pid_max: default: 32768 minimum: 501
[ 0.000050] Security Framework initialized
[ 0.000348] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001504] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.002002] Mount-cache hash table entries: 256
[ 0.002221] Initializing cgroup subsys cpuacct
[ 0.002223] Initializing cgroup subsys memory
[ 0.002234] Initializing cgroup subsys devices
[ 0.002236] Initializing cgroup subsys freezer
[ 0.002237] Initializing cgroup subsys net_cls
[ 0.002239] Initializing cgroup subsys blkio
[ 0.002268] CPU: Physical Processor ID: 0
[ 0.002270] CPU: Processor Core ID: 0
[ 0.002275] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.002275] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.002278] mce: CPU supports 7 MCE banks
[ 0.002287] CPU0: Thermal monitoring handled by SMI
[ 0.002295] using mwait in idle threads.
[ 0.002895] ACPI: Core revision 20120320
[ 0.022054] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061698] CPU0: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz stepping 07
[ 0.168402] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[ 0.168416] PEBS disabled due to CPU errata.
[ 0.168422] ... version: 3
[ 0.168425] ... bit width: 48
[ 0.168428] ... generic registers: 4
[ 0.168431] ... value mask: 0000ffffffffffff
[ 0.168434] ... max period: 000000007fffffff
[ 0.168437] ... fixed-purpose events: 3
[ 0.168441] ... event mask: 000000070000000f
[ 0.168819] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.180639] CPU1: Thermal monitoring handled by SMI
[ 0.194157] CPU2: Thermal monitoring handled by SMI
[ 0.207656] CPU3: Thermal monitoring handled by SMI
[ 0.169138] Booting Node 0, Processors #1 #2 #3
[ 0.209906] Brought up 4 CPUs
[ 0.209915] Total of 4 processors activated (17559.36 BogoMIPS).
[ 0.218788] devtmpfs: initialized
[ 0.227007] PM: Registering ACPI NVS region [mem 0xacebf000-0xacfbefff] (1048576 bytes)
[ 0.227360] dummy:
[ 0.227546] NET: Registered protocol family 16
[ 0.227913] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.227918] ACPI: bus type pci registered
[ 0.228105] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.228111] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.264953] PCI: Using configuration type 1 for base access
[ 0.266664] bio: create slab <bio-0> at 0
[ 0.266916] ACPI: Added _OSI(Module Device)
[ 0.266924] ACPI: Added _OSI(Processor Device)
[ 0.266929] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.266933] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.270568] ACPI: EC: Look up EC in DSDT
[ 0.274134] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.283322] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.284770] ACPI: SSDT 00000000ace70798 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
[ 0.285763] ACPI: Dynamic OEM Table Load:
[ 0.285770] ACPI: SSDT (nil) 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
[ 0.286741] ACPI: SSDT 00000000ace71a98 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
[ 0.287850] ACPI: Dynamic OEM Table Load:
[ 0.287857] ACPI: SSDT (nil) 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
[ 0.288287] ACPI: SSDT 00000000ace6fd98 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
[ 0.289224] ACPI: Dynamic OEM Table Load:
[ 0.289229] ACPI: SSDT (nil) 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
[ 0.295801] ACPI: Interpreter enabled
[ 0.295813] ACPI: (supports S0 S3 S4 S5)
[ 0.295893] ACPI: Using IOAPIC for interrupt routing
[ 0.307194] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 0.307583] ACPI: No dock devices found.
[ 0.307594] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.308709] \_SB_.PCI0:_OSC invalid UUID
[ 0.308713] _OSC request data:1 8 1f
[ 0.308724] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.310536] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.310543] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.310549] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.310557] pci_root PNP0A08:00: host bridge window [mem 0xafa00000-0xfeafffff]
[ 0.310646] PCI host bridge to bus 0000:00
[ 0.310656] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.310666] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.310672] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.310677] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff]
[ 0.310701] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.310797] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[ 0.310826] pci 0000:00:02.0: reg 10: [mem 0xc0000000-0xc03fffff 64bit]
[ 0.310843] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.310856] pci 0000:00:02.0: reg 20: [io 0x4000-0x403f]
[ 0.310998] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.311048] pci 0000:00:16.0: reg 10: [mem 0xc2604000-0xc260400f 64bit]
[ 0.311209] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.311289] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.311754] pci 0000:00:1a.0: reg 10: [mem 0xc2609000-0xc26093ff]
[ 0.314279] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.314343] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.314381] pci 0000:00:1b.0: reg 10: [mem 0xc2600000-0xc2603fff 64bit]
[ 0.314555] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.314611] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.314794] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.314855] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 0.315036] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.315095] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
[ 0.315277] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.315355] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.315787] pci 0000:00:1d.0: reg 10: [mem 0xc2608000-0xc26083ff]
[ 0.318296] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.318352] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[ 0.318599] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[ 0.318652] pci 0000:00:1f.2: reg 10: [io 0x4088-0x408f]
[ 0.318674] pci 0000:00:1f.2: reg 14: [io 0x4094-0x4097]
[ 0.318695] pci 0000:00:1f.2: reg 18: [io 0x4080-0x4087]
[ 0.318716] pci 0000:00:1f.2: reg 1c: [io 0x4090-0x4093]
[ 0.318737] pci 0000:00:1f.2: reg 20: [io 0x4060-0x407f]
[ 0.318759] pci 0000:00:1f.2: reg 24: [mem 0xc2607000-0xc26077ff]
[ 0.318881] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.318930] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.318969] pci 0000:00:1f.3: reg 10: [mem 0xc2605000-0xc26050ff 64bit]
[ 0.319022] pci 0000:00:1f.3: reg 20: [io 0x4040-0x405f]
[ 0.319248] pci 0000:01:00.0: [1814:5390] type 00 class 0x028000
[ 0.319307] pci 0000:01:00.0: reg 10: [mem 0xc2500000-0xc250ffff]
[ 0.324278] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.324294] pci 0000:00:1c.0: bridge window [mem 0xc2500000-0xc25fffff]
[ 0.324445] pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000
[ 0.324479] pci 0000:02:00.0: reg 10: [io 0x3000-0x30ff]
[ 0.324538] pci 0000:02:00.0: reg 18: [mem 0xc0404000-0xc0404fff 64bit pref]
[ 0.324576] pci 0000:02:00.0: reg 20: [mem 0xc0400000-0xc0403fff 64bit pref]
[ 0.324731] pci 0000:02:00.0: supports D1 D2
[ 0.324737] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.332248] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.332258] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.332278] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
[ 0.332421] pci 0000:03:00.0: [10ec:5209] type 00 class 0xff0000
[ 0.332457] pci 0000:03:00.0: reg 10: [mem 0xc1500000-0xc1500fff]
[ 0.332700] pci 0000:03:00.0: supports D1 D2
[ 0.332705] pci 0000:03:00.0: PME# supported from D1 D2 D3hot
[ 0.340239] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[ 0.340249] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.340258] pci 0000:00:1c.2: bridge window [mem 0xc1500000-0xc24fffff]
[ 0.340272] pci 0000:00:1c.2: bridge window [mem 0xc0500000-0xc14fffff 64bit pref]
[ 0.340314] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.340872] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.340981] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.341102] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.341382] \_SB_.PCI0:_OSC invalid UUID
[ 0.341385] _OSC request data:1 1f 1f
[ 0.341396] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.341507] \_SB_.PCI0:_OSC invalid UUID
[ 0.341510] _OSC request data:1 0 1d
[ 0.341519] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[ 0.341522] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.347896] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.348047] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.348189] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.348342] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.348483] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.348627] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.348773] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.348913] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.349161] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.349181] vgaarb: loaded
[ 0.349184] vgaarb: bridge control possible 0000:00:02.0
[ 0.349285] PCI: Using ACPI for IRQ routing
[ 0.366796] PCI: pci_cache_line_size set to 64 bytes
[ 0.366961] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.366967] e820: reserve RAM buffer [mem 0xace3f000-0xafffffff]
[ 0.366975] e820: reserve RAM buffer [mem 0xad000000-0xafffffff]
[ 0.366981] e820: reserve RAM buffer [mem 0x14fe00000-0x14fffffff]
[ 0.367282] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.367298] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.369338] Switching to clocksource hpet
[ 0.373796] pnp: PnP ACPI init
[ 0.373833] ACPI: bus type pnp registered
[ 0.375089] pnp 00:00: [bus 00-fe]
[ 0.375097] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.375102] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.375108] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.375114] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.375120] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.375128] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.375133] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.375138] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.375143] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.375149] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.375154] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.375159] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.375164] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.375169] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.375175] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.375180] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.375185] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.375190] pnp 00:00: [mem 0xafa00000-0xfeafffff window]
[ 0.375306] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.375371] pnp 00:01: [io 0x0000-0x001f]
[ 0.375377] pnp 00:01: [io 0x0081-0x0091]
[ 0.375381] pnp 00:01: [io 0x0093-0x009f]
[ 0.375386] pnp 00:01: [io 0x00c0-0x00df]
[ 0.375392] pnp 00:01: [dma 4]
[ 0.375456] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.375480] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 0.375538] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.375753] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.375818] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.375847] pnp 00:04: [io 0x00f0]
[ 0.375864] pnp 00:04: [irq 13]
[ 0.375925] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.375957] pnp 00:05: [io 0x002e-0x002f]
[ 0.375962] pnp 00:05: [io 0x004e-0x004f]
[ 0.375966] pnp 00:05: [io 0x0061]
[ 0.375971] pnp 00:05: [io 0x0063]
[ 0.375976] pnp 00:05: [io 0x0065]
[ 0.375981] pnp 00:05: [io 0x0067]
[ 0.375985] pnp 00:05: [io 0x0070]
[ 0.375990] pnp 00:05: [io 0x0080]
[ 0.375997] pnp 00:05: [io 0x0092]
[ 0.376002] pnp 00:05: [io 0x00b2-0x00b3]
[ 0.376007] pnp 00:05: [io 0x0680-0x069f]
[ 0.376012] pnp 00:05: [io 0x1004-0x1013]
[ 0.376016] pnp 00:05: [io 0xffff]
[ 0.376021] pnp 00:05: [io 0xffff]
[ 0.376026] pnp 00:05: [io 0x0400-0x0453]
[ 0.376031] pnp 00:05: [io 0x0454-0x0457]
[ 0.376035] pnp 00:05: [io 0x0458-0x047f]
[ 0.376040] pnp 00:05: [io 0x0500-0x057f]
[ 0.376045] pnp 00:05: [io 0x164e-0x164f]
[ 0.376050] pnp 00:05: [io 0x0380-0x0387]
[ 0.376054] pnp 00:05: [io 0x0068-0x006f]
[ 0.376169] system 00:05: [io 0x0680-0x069f] has been reserved
[ 0.376179] system 00:05: [io 0x1004-0x1013] has been reserved
[ 0.376186] system 00:05: [io 0xffff] has been reserved
[ 0.376192] system 00:05: [io 0xffff] has been reserved
[ 0.376201] system 00:05: [io 0x0400-0x0453] has been reserved
[ 0.376207] system 00:05: [io 0x0454-0x0457] has been reserved
[ 0.376213] system 00:05: [io 0x0458-0x047f] has been reserved
[ 0.376219] system 00:05: [io 0x0500-0x057f] has been reserved
[ 0.376226] system 00:05: [io 0x164e-0x164f] has been reserved
[ 0.376232] system 00:05: [io 0x0380-0x0387] has been reserved
[ 0.376239] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.376263] pnp 00:06: [io 0x0070-0x0077]
[ 0.376275] pnp 00:06: [irq 8]
[ 0.376343] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.376391] pnp 00:07: [io 0x0060]
[ 0.376396] pnp 00:07: [io 0x0064]
[ 0.376407] pnp 00:07: [irq 1]
[ 0.376483] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.376529] pnp 00:08: [irq 12]
[ 0.376613] pnp 00:08: Plug and Play ACPI device, IDs SYN1e40 SYN1e00 SYN0002 PNP0f13 (active)
[ 0.376929] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
[ 0.376935] pnp 00:09: [mem 0xfed10000-0xfed17fff]
[ 0.376940] pnp 00:09: [mem 0xfed18000-0xfed18fff]
[ 0.376945] pnp 00:09: [mem 0xfed19000-0xfed19fff]
[ 0.376950] pnp 00:09: [mem 0xe0000000-0xefffffff]
[ 0.376955] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
[ 0.376960] pnp 00:09: [mem 0xfed90000-0xfed93fff]
[ 0.376965] pnp 00:09: [mem 0xff000000-0xffffffff]
[ 0.376970] pnp 00:09: [mem 0xfee00000-0xfeefffff]
[ 0.376975] pnp 00:09: [mem 0xafa00000-0xafa00fff]
[ 0.377086] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.377093] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.377099] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.377106] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.377112] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.377119] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.377125] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.377132] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.377139] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.377145] system 00:09: [mem 0xafa00000-0xafa00fff] has been reserved
[ 0.377152] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.377745] pnp 00:0a: [mem 0x20000000-0x201fffff]
[ 0.377754] pnp 00:0a: [mem 0x40000000-0x401fffff]
[ 0.377885] system 00:0a: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.377892] system 00:0a: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.377899] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.377949] pnp: PnP ACPI: found 11 devices
[ 0.377953] ACPI: ACPI bus type pnp unregistered
[ 0.387784] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.387799] pci 0000:00:1c.0: bridge window [mem 0xc2500000-0xc25fffff]
[ 0.387819] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.387827] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.387844] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
[ 0.387859] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[ 0.387866] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.387878] pci 0000:00:1c.2: bridge window [mem 0xc1500000-0xc24fffff]
[ 0.387888] pci 0000:00:1c.2: bridge window [mem 0xc0500000-0xc14fffff 64bit pref]
[ 0.387972] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.387977] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.387983] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.387988] pci_bus 0000:00: resource 7 [mem 0xafa00000-0xfeafffff]
[ 0.387994] pci_bus 0000:01: resource 1 [mem 0xc2500000-0xc25fffff]
[ 0.387999] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.388004] pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc04fffff 64bit pref]
[ 0.388010] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.388015] pci_bus 0000:03: resource 1 [mem 0xc1500000-0xc24fffff]
[ 0.388020] pci_bus 0000:03: resource 2 [mem 0xc0500000-0xc14fffff 64bit pref]
[ 0.388178] NET: Registered protocol family 2
[ 0.388534] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.390643] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.394848] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.395179] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.395183] TCP: reno registered
[ 0.395205] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.395257] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.395513] NET: Registered protocol family 1
[ 0.395549] pci 0000:00:02.0: Boot video device
[ 0.425379] PCI: CLS 64 bytes, default 64
[ 0.425498] Unpacking initramfs...
[ 8.086202] Freeing initrd memory: 126692k freed
[ 8.123887] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 8.123899] software IO TLB [mem 0xa8e38000-0xace37fff] (64MB) mapped at [ffff8800a8e38000-ffff8800ace37fff]
[ 8.123984] Simple Boot Flag at 0x44 set to 0x1
[ 8.125322] audit: initializing netlink socket (disabled)
[ 8.125359] type=2000 audit(1344511916.016:1): initialized
[ 8.125373] kretprobe: lookup failed: __switch_to
[ 8.126137] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 8.127559] VFS: Disk quotas dquot_6.5.2
[ 8.127626] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 8.127807] msgmni has been set to 7812
[ 8.128388] alg: No test for stdrng (krng)
[ 8.128462] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 8.128467] io scheduler noop registered
[ 8.128471] io scheduler deadline registered
[ 8.128518] io scheduler cfq registered (default)
[ 8.129152] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 8.129155] vesafb: scrolling: redraw
[ 8.129161] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 8.129691] vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90011100000, using 3072k, total 3072k
[ 8.280246] Console: switching to colour frame buffer device 128x48
[ 8.430633] fb0: VESA VGA frame buffer device
[ 8.430700] intel_idle: MWAIT substates: 0x21120
[ 8.430704] intel_idle: v0.4 model 0x2A
[ 8.430707] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 8.430789] GHES: HEST is not enabled!
[ 8.430915] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 8.432033] Linux agpgart interface v0.103
[ 8.432220] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[ 8.432343] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 8.434740] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 8.434978] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
[ 8.435268] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 8.445166] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 8.445182] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 8.445446] mousedev: PS/2 mouse device common for all mice
[ 8.445606] rtc_cmos 00:06: RTC can wake from S4
[ 8.445818] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 8.445862] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 8.446127] cpuidle: using governor ladder
[ 8.446485] cpuidle: using governor menu
[ 8.446576] drop_monitor: Initializing network drop monitor service
[ 8.446849] TCP: cubic registered
[ 8.447084] NET: Registered protocol family 10
[ 8.447712] mip6: Mobile IPv6
[ 8.447719] NET: Registered protocol family 17
[ 8.447747] Key type dns_resolver registered
[ 8.448270] PM: Hibernation image not present or could not be loaded.
[ 8.448294] registered taskstats version 1
[ 8.449713] rtc_cmos 00:06: setting system clock to 2012-08-09 11:31:56 UTC (1344511916)
[ 8.451386] Freeing unused kernel memory: 672k freed
[ 8.458260] grsec: mount of sysfs to /sys by /bin/busybox[busybox:48] uid/euid:0/0 gid/egid:0/0, parent /init[init:1] uid/euid:0/0 gid/egid:0/0
[ 8.459456] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 8.459977] grsec: mount of proc to /proc by /bin/busybox[busybox:49] uid/euid:0/0 gid/egid:0/0, parent /init[init:1] uid/euid:0/0 gid/egid:0/0
[ 8.461953] grsec: mount of udev to /dev by /bin/busybox[busybox:50] uid/euid:0/0 gid/egid:0/0, parent /init[init:1] uid/euid:0/0 gid/egid:0/0
[ 8.464268] grsec: mount of devpts to /dev/pts by /bin/busybox[busybox:52] uid/euid:0/0 gid/egid:0/0, parent /init[init:1] uid/euid:0/0 gid/egid:0/0
[ 8.466055] grsec: mount of tmpfs to /run by /bin/busybox[busybox:53] uid/euid:0/0 gid/egid:0/0, parent /init[init:1] uid/euid:0/0 gid/egid:0/0
[ 8.630278] udevd[65]: starting version 175
[ 8.705687] ACPI: bus type usb registered
[ 8.705800] usbcore: registered new interface driver usbfs
[ 8.705853] usbcore: registered new interface driver hub
[ 8.707545] usbcore: registered new device driver usb
[ 8.710401] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.710541] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 8.710554] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 8.710578] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 8.710649] ehci_hcd 0000:00:1a.0: debug port 2
[ 8.714539] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 8.714597] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xc2609000
[ 8.715258] SCSI subsystem initialized
[ 8.715338] [Firmware Bug]: Invalid critical threshold (0)
[ 8.724261] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 8.724340] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 8.724351] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.724360] usb usb1: Product: EHCI Host Controller
[ 8.724368] usb usb1: Manufacturer: Linux 3.5.0-grsec ehci_hcd
[ 8.724376] usb usb1: SerialNumber: 0000:00:1a.0
[ 8.724896] hub 1-0:1.0: USB hub found
[ 8.724916] hub 1-0:1.0: 2 ports detected
[ 8.725245] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 8.725257] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 8.725279] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 8.725350] ehci_hcd 0000:00:1d.0: debug port 2
[ 8.727265] thermal LNXTHERM:00: registered as thermal_zone0
[ 8.727276] ACPI: Thermal Zone [TZ01] (55 C)
[ 8.729264] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 8.729835] ehci_hcd 0000:00:1d.0: irq 21, io mem 0xc2608000
[ 8.735913] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 8.736292] libata version 3.00 loaded.
[ 8.740231] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 8.740304] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 8.740315] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.740325] usb usb2: Product: EHCI Host Controller
[ 8.740333] usb usb2: Manufacturer: Linux 3.5.0-grsec ehci_hcd
[ 8.740340] usb usb2: SerialNumber: 0000:00:1d.0
[ 8.740839] hub 2-0:1.0: USB hub found
[ 8.740859] hub 2-0:1.0: 2 ports detected
[ 8.745413] r8169 0000:02:00.0: irq 40 for MSI/MSI-X
[ 8.745992] r8169 0000:02:00.0: eth0: RTL8105e at 0xffffc9000066e000, ec:9a:74:40:4c:9c, XID 00a00000 IRQ 40
[ 8.746053] ahci 0000:00:1f.2: version 3.0
[ 8.746254] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 8.760224] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x11 impl SATA mode
[ 8.760242] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[ 8.760257] ahci 0000:00:1f.2: setting latency timer to 64
[ 8.771156] scsi0 : ahci
[ 8.771559] scsi1 : ahci
[ 8.776206] scsi2 : ahci
[ 8.776960] scsi3 : ahci
[ 8.780269] scsi4 : ahci
[ 8.784164] scsi5 : ahci
[ 8.784573] ata1: SATA max UDMA/133 abar m2048@0xc2607000 port 0xc2607100 irq 41
[ 8.784579] ata2: DUMMY
[ 8.784582] ata3: DUMMY
[ 8.784585] ata4: DUMMY
[ 8.784591] ata5: SATA max UDMA/133 abar m2048@0xc2607000 port 0xc2607300 irq 41
[ 8.784594] ata6: DUMMY
[ 9.035940] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 9.103873] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 9.103925] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9.104372] ata5.00: ATAPI: hp DVD A DS8A5LH, 1H68, max UDMA/100
[ 9.105805] ata5.00: configured for UDMA/100
[ 9.119836] Refined TSC clocksource calibration: 2195.013 MHz.
[ 9.119849] Switching to clocksource tsc
[ 9.136190] ata1.00: ATA-8: ST9640423AS, 0001HPM1, max UDMA/133
[ 9.136201] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 9.154003] ata1.00: configured for UDMA/133
[ 9.154419] scsi 0:0:0:0: Direct-Access ATA ST9640423AS 0001 PQ: 0 ANSI: 5
[ 9.157008] scsi 4:0:0:0: CD-ROM hp DVD A DS8A5LH 1H68 PQ: 0 ANSI: 5
[ 9.168175] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 9.168192] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 9.168779] hub 1-1:1.0: USB hub found
[ 9.168899] hub 1-1:1.0: 6 ports detected
[ 9.169663] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[ 9.169676] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 9.169831] sd 0:0:0:0: [sda] Write Protect is off
[ 9.169841] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 9.169909] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.175772] sr0: scsi3-mmc drive: 10x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 9.175780] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 9.176068] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 9.218807] sda: sda1 sda2 < sda5 >
[ 9.220149] sd 0:0:0:0: [sda] Attached SCSI disk
[ 9.279681] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 9.412233] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 9.412245] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 9.412747] hub 2-1:1.0: USB hub found
[ 9.412881] hub 2-1:1.0: 6 ports detected
[ 9.683423] usb 2-1.5: new high-speed USB device number 3 using ehci_hcd
[ 9.819806] usb 2-1.5: New USB device found, idVendor=05c8, idProduct=021e
[ 9.819818] usb 2-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 9.819823] usb 2-1.5: Product: HP Webcam-101
[ 9.819828] usb 2-1.5: Manufacturer: HP Webcam-101
[ 9.819833] usb 2-1.5: SerialNumber: HP Webcam-101
[ 10.620421] device-mapper: uevent: version 1.0.3
[ 10.620600] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 41.140517] PM: Starting manual resume from disk
[ 41.140521] PM: Hibernation image partition 254:2 present
[ 41.140522] PM: Looking for hibernation image.
[ 41.141074] PM: Image not found (code -22)
[ 41.141076] PM: Hibernation image not present or could not be loaded.
[ 41.297729] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 41.297745] grsec: mount of /dev/mapper/debian-root to /root by /bin/busybox[busybox:285] uid/euid:0/0 gid/egid:0/0, parent /init[init:1] uid/euid:0/0 gid/egid:0/0
[ 41.354179] grsec: mount of /dev to /root/dev by /bin/busybox[busybox:292] uid/euid:0/0 gid/egid:0/0, parent /scripts/init-bottom/udev[udev:290] uid/euid:0/0 gid/egid:0/0
[ 41.379654] grsec: mount of /run to /root/run by /bin/busybox[busybox:295] uid/euid:0/0 gid/egid:0/0, parent /init[init:1] uid/euid:0/0 gid/egid:0/0
[ 41.425300] grsec: mount of /sys to /root/sys by /bin/busybox[busybox:296] uid/euid:0/0 gid/egid:0/0, parent /init[init:1] uid/euid:0/0 gid/egid:0/0
[ 41.455440] grsec: mount of /proc to /root/proc by /bin/busybox[busybox:297] uid/euid:0/0 gid/egid:0/0, parent /init[init:1] uid/euid:0/0 gid/egid:0/0
[ 41.509307] grsec: mount of . to / by /bin/busybox[busybox:1] uid/euid:0/0 gid/egid:0/0, parent /[swapper/0:0] uid/euid:0/0 gid/egid:0/0
[ 43.507005] grsec: mount of tmpfs to /run/lock by /bin/mount[mount:333] uid/euid:0/0 gid/egid:0/0, parent /etc/init.d/mountkernfs.sh[mountkernfs.sh:311] uid/euid:0/0 gid/egid:0/0
[ 43.530537] grsec: mount of tmpfs to /tmp by /bin/mount[mount:341] uid/euid:0/0 gid/egid:0/0, parent /etc/init.d/mountkernfs.sh[mountkernfs.sh:311] uid/euid:0/0 gid/egid:0/0
[ 43.734518] udevd[375]: starting version 175
[ 44.950901] ACPI: Battery Slot [BAT0] (battery present)
[ 44.951294] ACPI: AC Adapter [ACAD] (off-line)
[ 45.177441] wmi: Mapper loaded
[ 45.191438] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 45.191725] ACPI: Lid Switch [LID0]
[ 45.191784] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 45.191790] ACPI: Power Button [PWRB]
[ 45.191863] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 45.191867] ACPI: Power Button [PWRF]
[ 45.781606] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x18
[ 45.881267] grsec: time set by /sbin/hwclock[hwclock:539] uid/euid:0/0 gid/egid:0/0, parent /lib/udev/hwclock-set[hwclock-set:533] uid/euid:0/0 gid/egid:0/0
[ 46.054420] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x18
[ 46.056361] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x18
[ 46.058459] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x18
[ 46.060436] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 46.113888] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 46.412017] ACPI: Requesting acpi_cpufreq
[ 46.791513] ACPI Warning: 0x0000000000000460-0x000000000000047f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[ 46.791521] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 46.791523] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
[ 46.791526] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[ 46.791530] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 46.791533] ACPI Warning: 0x0000000000000500-0x000000000000057f SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
[ 46.791537] ACPI Warning: 0x0000000000000500-0x000000000000057f SystemIO conflicts with Region \_SB_.WMID.GPIO 2 (20120320/utaddress-251)
[ 46.791540] ACPI Warning: 0x0000000000000500-0x000000000000057f SystemIO conflicts with Region \_SB_.PCI0.LPCB.GPIO 3 (20120320/utaddress-251)
[ 46.791544] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 46.791545] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 47.177969] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20120320/dsopcode-236)
[ 47.177977] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWMC] (Node ffff88014a2833a8), AE_AML_BUFFER_LIMIT (20120320/psparse-536)
[ 47.177987] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff88014a283e98), AE_AML_BUFFER_LIMIT (20120320/psparse-536)
[ 47.178032] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20120320/dsopcode-236)
[ 47.178036] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWMC] (Node ffff88014a2833a8), AE_AML_BUFFER_LIMIT (20120320/psparse-536)
[ 47.178042] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff88014a283e98), AE_AML_BUFFER_LIMIT (20120320/psparse-536)
[ 47.178104] input: HP WMI hotkeys as /devices/virtual/input/input5
[ 47.178230] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20120320/dsopcode-236)
[ 47.178234] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWMC] (Node ffff88014a2833a8), AE_AML_BUFFER_LIMIT (20120320/psparse-536)
[ 47.178241] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff88014a283e98), AE_AML_BUFFER_LIMIT (20120320/psparse-536)
[ 47.178302] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20120320/dsopcode-236)
[ 47.178309] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWMC] (Node ffff88014a2833a8), AE_AML_BUFFER_LIMIT (20120320/psparse-536)
[ 47.178318] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff88014a283e98), AE_AML_BUFFER_LIMIT (20120320/psparse-536)
[ 47.639999] rts_pstor: module is from the staging directory, the quality is unknown, you have been warned.
[ 47.640622] Initializing Realtek PCIE storage driver...
[ 47.640693] Resource length: 0x1000
[ 47.640741] Original address: 0xc1500000, remapped address: 0xffffc900110ec000
[ 47.640744] pci->irq = 18
[ 47.640745] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 18
[ 47.665951] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400
[ 47.717583] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 47.765767] ACPI Warning: 0x0000000000004040-0x000000000000405f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120320/utaddress-251)
[ 47.765776] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 47.837678] scsi6 : SCSI emulation for PCI-Express Mass Storage devices
[ 47.837776] rts_pstor: waiting for device to settle before scanning
[ 48.822855] cfg80211: Calling CRDA to update world regulatory domain
[ 48.836253] rts_pstor: device scan complete
[ 48.836388] scsi 6:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
[ 48.836958] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 48.942716] [drm] Initialized drm 1.1.0 20060810
[ 49.814565] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[ 49.850221] Linux media interface: v0.10
[ 50.581839] Linux video capture interface: v2.00
[ 50.607571] kvm: disabled by bios
[ 50.756744] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 50.987276] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 50.987409] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 50.987492] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 50.988347] checking generic (b0000000 300000) vs hw (b0000000 10000000)
[ 50.988351] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 50.988376] Console: switching to colour dummy device 80x25
[ 50.988467] i915 0000:00:02.0: setting latency timer to 64
[ 51.008694] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[ 51.008707] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 51.008708] [drm] Driver supports precise vblank timestamp query.
[ 51.008750] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 51.484154] cfg80211: World regulatory domain updated:
[ 51.484158] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 51.484161] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 51.484163] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 51.484165] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 51.484168] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 51.484169] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 51.493427] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 51.626895] fbcon: inteldrmfb (fb0) is primary device
[ 51.659578] uvcvideo: Found UVC 1.00 device HP Webcam-101 (05c8:021e)
[ 51.674434] input: HP Webcam-101 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input11
[ 51.674663] usbcore: registered new interface driver uvcvideo
[ 51.674664] USB Video Class driver (1.1.1)
[ 51.856994] Console: switching to colour frame buffer device 200x56
[ 51.867524] fb0: inteldrmfb frame buffer device
[ 51.867525] drm: registered panic notifier
[ 51.871103] acpi device:1f: registered as cooling_device4
[ 51.871304] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 51.871378] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input12
[ 51.871476] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 52.000050] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 52.000054] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 52.000056] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 52.000058] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 52.000059] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 52.000061] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 52.000063] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 52.000064] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 52.000066] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 52.000068] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 52.000069] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 52.000071] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 52.000073] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 52.000074] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 52.000076] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 52.000078] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 52.000079] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 52.000081] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 52.000082] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 52.000084] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 52.000086] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 52.000087] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 52.000089] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 52.000091] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 52.000092] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 52.000094] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 52.000096] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 52.000097] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 52.032293] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 52.032532] Registered led device: rt2800pci-phy0::radio
[ 52.032551] Registered led device: rt2800pci-phy0::assoc
[ 52.032569] Registered led device: rt2800pci-phy0::quality
[ 52.358257] grsec: mount of tmpfs to /run/shm by /bin/mount[mount:760] uid/euid:0/0 gid/egid:0/0, parent /etc/init.d/mountdevsubfs.sh[mountdevsubfs.s:749] uid/euid:0/0 gid/egid:0/0
[ 53.260753] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 53.260764] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 53.317320] EXT4-fs (dm-1): re-mounted. Opts: (null)
[ 53.317348] grsec: mount of /dev/mapper/debian-root to / by /bin/mount[mount:874] uid/euid:0/0 gid/egid:0/0, parent /etc/init.d/checkroot.sh[checkroot.sh:860] uid/euid:0/0 gid/egid:0/0
[ 53.366688] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[ 53.366699] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 53.545991] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 53.545997] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 53.618036] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[ 53.618048] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 53.671271] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[ 53.671299] grsec: mount of /dev/mapper/debian-root to / by /bin/mount[mount:899] uid/euid:0/0 gid/egid:0/0, parent /etc/init.d/checkroot.sh[checkroot.sh:860] uid/euid:0/0 gid/egid:0/0
[ 53.760794] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 53.760807] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 53.833502] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[ 53.833514] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 53.940103] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 53.940114] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 54.012502] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[ 54.012512] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 54.082200] loop: module loaded
[ 54.120452] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 54.120457] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 54.191470] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[ 54.191482] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 54.479625] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 54.479635] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 54.550800] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[ 54.550817] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 54.916446] grsec: mount of tmpfs to /run by /bin/mount[mount:1105] uid/euid:0/0 gid/egid:0/0, parent /etc/init.d/mountkernfs.sh[mountkernfs.sh:1090] uid/euid:0/0 gid/egid:0/0
[ 54.929643] grsec: mount of tmpfs to /run/lock by /bin/mount[mount:1112] uid/euid:0/0 gid/egid:0/0, parent /etc/init.d/mountkernfs.sh[mountkernfs.sh:1090] uid/euid:0/0 gid/egid:0/0
[ 54.945340] grsec: mount of tmpfs to /tmp by /bin/mount[mount:1119] uid/euid:0/0 gid/egid:0/0, parent /etc/init.d/mountkernfs.sh[mountkernfs.sh:1090] uid/euid:0/0 gid/egid:0/0
[ 54.961510] grsec: mount of proc to /proc by /bin/mount[mount:1126] uid/euid:0/0 gid/egid:0/0, parent /etc/init.d/mountkernfs.sh[mountkernfs.sh:1090] uid/euid:0/0 gid/egid:0/0
[ 54.987656] grsec: mount of sysfs to /sys by /bin/mount[mount:1135] uid/euid:0/0 gid/egid:0/0, parent /etc/init.d/mountkernfs.sh[mountkernfs.sh:1090] uid/euid:0/0 gid/egid:0/0
[ 55.086040] grsec: mount of tmpfs to /run/shm by /bin/mount[mount:1175] uid/euid:0/0 gid/egid:0/0, parent /etc/init.d/mountdevsubfs.sh[mountdevsubfs.s:1165] uid/euid:0/0 gid/egid:0/0
[ 55.105340] grsec: mount of devpts to /dev/pts by /bin/mount[mount:1183] uid/euid:0/0 gid/egid:0/0, parent /etc/init.d/mountdevsubfs.sh[mountdevsubfs.s:1165] uid/euid:0/0 gid/egid:0/0
[ 55.352503] Adding 8282108k swap on /dev/mapper/debian-swap_1. Priority:-1 extents:1 across:8282108k
[ 55.827840] grsec: mount of /dev/sda1 to /boot by /bin/mount[mount:1314] uid/euid:0/0 gid/egid:0/0, parent /etc/init.d/mountall.sh[mountall.sh:1307] uid/euid:0/0 gid/egid:0/0
[ 55.828010] grsec: mount of tmpfs to /var/tmp by /bin/mount[mount:1314] uid/euid:0/0 gid/egid:0/0, parent /etc/init.d/mountall.sh[mountall.sh:1307] uid/euid:0/0 gid/egid:0/0
[ 60.038441] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input13
[ 61.280498] grsec: mount of binfmt_misc to /proc/sys/fs/binfmt_misc by /bin/mount[mount:2020] uid/euid:0/0 gid/egid:0/0, parent /usr/sbin/update-binfmts[update-binfmts:2018] uid/euid:0/0 gid/egid:0/0
[ 67.004376] fuse init (API version 7.19)
[ 67.006719] grsec: mount of fusectl to /sys/fs/fuse/connections by /bin/mount[mount:2343] uid/euid:0/0 gid/egid:0/0, parent /sbin/udevd[udevd:528] uid/euid:0/0 gid/egid:0/0
[ 72.684950] grsec: denied access of range 0 -> 4000 in /dev/mem by /usr/bin/wdm[wdm:2470] uid/euid:0/0 gid/egid:0/0, parent /usr/bin/wdm[wdm:2469] uid/euid:0/0 gid/egid:0/0