GRSec + 2.6.14.2 does not work

Discuss usability issues, general maintenance, and general support issues for a grsecurity-enabled system.

GRSec + 2.6.14.2 does not work

Postby Lord_Pinhead » Thu Nov 24, 2005 7:20 pm

Hi,

i have a little Problem with my GRSec Kernel. After Patching and Booting my new Kernel, i want to start the Learning Mode, but the only thing i see was that:
Code: Select all
~# gradm -E
Could not open /dev/grsec.
open: No such device or address

:~# file /dev/grsec
/dev/grsec: character special (1/12)


Thats the only thing i see, has anyone else this problem? Hope someone see why it fails, its to late for finding a problem. I attach my config and the uname.

So long
LP

Code: Select all
Linux spieleplanet.ch 2.6.14.2-grsec #1 SMP Thu Nov 24 16:00:28 CET 2005 i686 GNU/Linux


Code: Select all
# CONFIG_GRKERNSEC_LOW is not set
# CONFIG_GRKERNSEC_MEDIUM is not set
# CONFIG_GRKERNSEC_HIGH is not set
CONFIG_GRKERNSEC_CUSTOM=y
CONFIG_GRKERNSEC_KMEM=y
CONFIG_GRKERNSEC_IO=y
# CONFIG_GRKERNSEC_PROC_MEMMAP is not set
CONFIG_GRKERNSEC_BRUTE=y
CONFIG_GRKERNSEC_HIDESYM=y
CONFIG_GRKERNSEC_ACL_HIDEKERN=y
CONFIG_GRKERNSEC_ACL_MAXTRIES=3
CONFIG_GRKERNSEC_ACL_TIMEOUT=30
CONFIG_GRKERNSEC_PROC=y
# CONFIG_GRKERNSEC_PROC_USER is not set
# CONFIG_GRKERNSEC_PROC_USERGROUP is not set
CONFIG_GRKERNSEC_LINK=y
CONFIG_GRKERNSEC_FIFO=y
CONFIG_GRKERNSEC_CHROOT=y
CONFIG_GRKERNSEC_CHROOT_MOUNT=y
CONFIG_GRKERNSEC_CHROOT_DOUBLE=y
CONFIG_GRKERNSEC_CHROOT_PIVOT=y
CONFIG_GRKERNSEC_CHROOT_CHDIR=y
CONFIG_GRKERNSEC_CHROOT_CHMOD=y
CONFIG_GRKERNSEC_CHROOT_FCHDIR=y
CONFIG_GRKERNSEC_CHROOT_MKNOD=y
CONFIG_GRKERNSEC_CHROOT_SHMAT=y
CONFIG_GRKERNSEC_CHROOT_UNIX=y
CONFIG_GRKERNSEC_CHROOT_FINDTASK=y
CONFIG_GRKERNSEC_CHROOT_NICE=y
CONFIG_GRKERNSEC_CHROOT_SYSCTL=y
CONFIG_GRKERNSEC_CHROOT_CAPS=y
# CONFIG_GRKERNSEC_AUDIT_GROUP is not set
# CONFIG_GRKERNSEC_EXECLOG is not set
CONFIG_GRKERNSEC_RESLOG=y
CONFIG_GRKERNSEC_CHROOT_EXECLOG=y
CONFIG_GRKERNSEC_AUDIT_CHDIR=y
CONFIG_GRKERNSEC_AUDIT_MOUNT=y
CONFIG_GRKERNSEC_AUDIT_IPC=y
CONFIG_GRKERNSEC_SIGNAL=y
CONFIG_GRKERNSEC_FORKFAIL=y
CONFIG_GRKERNSEC_TIME=y
CONFIG_GRKERNSEC_PROC_IPADDR=y
# CONFIG_GRKERNSEC_AUDIT_TEXTREL is not set
CONFIG_GRKERNSEC_EXECVE=y
CONFIG_GRKERNSEC_SHM=y
CONFIG_GRKERNSEC_DMESG=y
CONFIG_GRKERNSEC_RANDPID=y
CONFIG_GRKERNSEC_TPE=y
CONFIG_GRKERNSEC_TPE_ALL=y
# CONFIG_GRKERNSEC_TPE_INVERT is not set
CONFIG_GRKERNSEC_TPE_GID=1005
CONFIG_GRKERNSEC_RANDNET=y
CONFIG_GRKERNSEC_RANDSRC=y
CONFIG_GRKERNSEC_SOCKET=y
# CONFIG_GRKERNSEC_SOCKET_ALL is not set
# CONFIG_GRKERNSEC_SOCKET_CLIENT is not set
# CONFIG_GRKERNSEC_SOCKET_SERVER is not set
CONFIG_GRKERNSEC_SYSCTL=y
CONFIG_GRKERNSEC_SYSCTL_ON=y
CONFIG_GRKERNSEC_FLOODTIME=10
CONFIG_GRKERNSEC_FLOODBURST=4
Lord_Pinhead
 
Posts: 2
Joined: Thu Nov 24, 2005 7:10 pm

Postby Thrawn » Fri Nov 25, 2005 4:50 am

Thrawn
 
Posts: 35
Joined: Wed Nov 23, 2005 9:54 am


Return to grsecurity support